Unlocking phone from the IMEI number is the safest and most reliable way to unlock your handset to use any network provider anywhere in the world. Unlocksimsolution is the leading provider of unlocking code for mobile phones and wireless devices.



How to enter unlock code on mobile phone

How to unlock phone free online



When your cell phone is simlocked ie locked to use a specific network provider, you can not change SIM card. When you try to insert a new SIM card from another operator, your device will display an error message: "SIM not accepted", "Restricted phone", "Invalid SIM" or "Enter unlock code / Subsidy code". You will have to use an unlock code to remove the network restriction of your handset, this mobile unlocking code is calculated from the IMEI number of the cellpone.

Unlocking instructions

Depending on the brand and the model of your phone, these unlocking instructions and guides will help you know how to enter your unlock code on your mobile phone. Do not hesitate to contact us if necessary for more information on the unlock instructions.

  • How to enter Alcatel unlock code

    • Model: 531 & 535

      1 - Turn ON your phone without a SIM inserted

      2 - Press * and hold down, without releasing enter: 787292

      3 - A new menu "Unlock Network" will appear, then select "YES"

      4 - Enter the unlock code we have sent you.

      Model: OT-Cxx

      1 - Insert the SIM card you wish to use & switch the phone ON

      2 - Phone should prompt you for either an NCK or SPCK code

      3 - Enter the prompted code (either NCK or SPCK)

      Model : All other Alcatel handsets

      1 - Switch on your phone with the new SIM card you want to use

      2 - When the message "Enter Network Key" appears enter the unlock code we have sent you.
  • How to enter iPhone unlock code

    • 1 – Install the last version of iTunes, download Here

      2 – Make sure your iPhone is updated with the lastest version of firmware

      3 – Switch on your iPhone with an Not Accepted SIM card

      4 – Connect your iPhone to your computer using the USB cable

      5 – Launch iTunes & wait until iTunes detect your iPhone

      6 – Now disconnect your iPhone and reconnect it after 10 seconds.

      7 – Your iPhone is now unlocked.

      NOTE: In case your iPhone is not unlocked after the above procedure, just do a full “Restore” and you will see the message “Congratulation’s, your iPhone has been unlocked” once the restore has completed.
  • How to enter BENQ unlock code

    • Model : All BENQ

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.
  • How to enter BlackBerry unlock code

    • Model : Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000

      Must be followed without a sim card inserted & wireless radios must be turned off.

      1 - Go to settings

      2 - Go to options

      3 - Go to advanced options

      4 - Go to sim card

      5 - Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing)

      6 - It will say "Enter Network MEP Code", type in the unlock code, press in the trackball to confirm

      7 - Your phone is now unlocked

      Model : 8900 Curve, 9500 Storm

      1 - Insert any sim card

      2 - Turn off all of the wireless connections

      3 - Go to Options

      4 - Select Advanced Options

      5 - Select SIM Card

      6 - Hit menu select show keybord

      7 - Enter mepd (you will not be able to see the typed info)

      8. Enter mep2

      9. It will say "Enter Network MEP Code", type in the unlock code, press in the trackball to confirm

      10. Your phone is now unlocked

      Model: Blackberry 8520 Curve

      1 - Insert a SIM card to your BlackBerry 8520 curve

      2 - Make sure all the connections are off(WIFI and Radio signal), Go to "Manage Connections" > "Turn All Connections Off"

      3 - Go to "Options" (or "Settings" > "Options") and then select and press the "Advanced Options"

      4 - From the "Advanced Options" menu select and press the "SIM Card" selection.

      5 - On the SIM Card screen type "MEPD" (you will not see what you are typing). 6 - Then, type"MEP2" ("MEP4" for some networks). hold the "ALT" key for the number while typing it like this: MEP-hold ALT-2 - (it will not show on screen)

      7 - A screen will show, then type the unlocking code for your BlackBerry 8520 curve and Press "Enter".repeat steps 5-6 if you dont see the unlocking code on screen when you type it.

      8. You will see a message: "Code Accepted", in case you get error message try to use other code in the same way.

      9. Restart your BlackBerry 8520 curve, turn the connctions back on. ("Manage Connections" > "Restore Connections") - Your BlackBerry 8520 curve is now unlocked!

      Model : All BlackBerry

      1 - Using the menu go to Settings Menu -> SIM card press select

      2 - While holding the SHIFT key, type mepd

      3 - You should see the five locking categories (note the active locks)

      4 - If network is active hold down the SHIFT KEY & type mep2

      (sim = mep1, subset = mep3, provider = mep4, corp = mep5 -

      5 - Release the shift key

      6 - You are now prompted to enter the Network MEP code

      7 - Enter the unlock code we have sent you

      8 - Enter Return/Enter

      Model : BlackBerry 8700

      1 - Go to the Menu -> Options -> Advanced Options -> Sim card press select.

      2 - While holding the Shift key (bottom right corner CAPS), type mepd.

      3 - You should now see the five locking categories listed, while holding the alt key, type mep2 - Release the alt key.

      4 - You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.

      Model : BlackBerry 8800

      *** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) ***

      1 - Go to settings menu => and then Options

      2 - Select Advanced options => and then Sim card

      3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

      4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

      5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received and press in the track wheel / jog dial to confirm

      6 - Your phone is now unlocked

      Model : BlackBerry 8100 Pearl

      1 - Go to Options Menu => Advanced Options

      2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd

      3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2

      4 - Enter the unlock code.

      Model : BlackBerry 8100 (Vodafone Australia)

      This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia.

      1 - Take note of the unlocking code shown above

      2 - Insert a Non-Vodafone Australia working SIM card.

      3 - Ensure the phone is charged and then switch the phone on.

      4 - Optional Step: If the SIM card has a PIN, enter your PIN number.

      5 - The phone will then display a message. The most common is “Invalid SIM card”. 6 - Select “Turn Wireless Off”

      7 - Select “Settings” Menu , then go to Advanced Options > SIM Card

      8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

      9. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above) 10. Reset the phone by pulling the battery

      11 - Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)

      NOTE: If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.

      To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.

      Model : BlackBerry 8820

      1 - Go to settings menu => and then Options

      2 - Select Advanced options => and then SIM card

      3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

      4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)

      5 - You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code and press in the track wheel /jog dial to confirm.

      6 - Your phone is now unlocked.
  • How to enter Bosch unlock code

    • Model : All Bosch

      1 - Switch on your phone with the SIM card you want to use

      2 - When the message "Enter Network Key" appears enter the unlock code we have sent you.
  • How to enter Ericsson unlock code

    • Model : All Ericsson

      1 - Switch ON your phone without SIM Card

      2 - Press once the left arrow

      3 - Press twice the button *

      4 - Press once the left arrow

      5 - The message "Personalize with MNC2" will appear

      6 - Enter the unlock code we have sent you.
  • How to enter Handspring unlock code

    • Model : Treo 180 & 270

      1 - Switch ON your phone without SIM Card

      2 - Enter : *#*#CODE#

      Model : Treo 600

      1 - Switch ON your phone with the SIM card you want to use

      2 - Go to Menu and select "Phone Tool" or "Phone Application"

      3 - Type on Virtual Keyboard *#*#CODE#

      4 - Select with PEN "Numer" and handset is now unlocked

      or

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.
  • How to enter HTC unlock code

    • Model : HTC SNAP

      1 - Go to "Setting"

      2 - Go to "Security"

      3 - Select "Unlocking SIM" (at the bottom option)

      4 - Enter Code you received

      Model : All Others

      1 - Switch ON mobile with an unsupported SIM Card,

      2 - If PIN is setup, enter the PIN code for your SIM Card

      3 - Enter the unlocking code when prompted
  • How to enter Huawei unlock code

    • Model: All Huawei

      1 - Turn ON the phone with an Unauthorized Sim Card.

      2 - Pone will prompt for Unlock Code.

      3 - Enter Unlock Code.

      4 - Phone now Unlocked.

      Check Lock Status on Huawei Phones:

      1 - At phone dial pad enter *#*#2846579#*#*

      2 - select "projectMenu"

      3 - select" Network Setting"

      4 - select "Sim card lock state query"

      5 - You will most likely to see this "SP_LOCK Confirmed" then, you need 3rd number.

      Reset Simlock Block Huawei

      Your provider should also give you 4 sets of number:

      1st number = Network lock

      2nd number = Network subset lock

      3rd number = Service provider lock

      4th number = Corporate Lock

      Notice: You must enter the 2nd code, 3rd code, and 4th code separately until the phone display “SIM Network Unlock Pin”, and then you enter the 1st code to unlock the phone.

      1 - Turn ON the phone with an Unauthorized Sim Card.

      2 - Enter the 2nd set of code.

      3 - Enter the 3rd set of code.

      4 - Enter the 4th set of code.

      5 - Enter the 1st set of code.

      6. Phone now unblocked and unlocked.
  • How to enter Kenwood unlock code

    • Model : All Kenwood

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.
  • How to enter LG Electronics unlock code

    • Useful Acronym Info:

      Network Control Key = NCK

      Service Provider Control Key = SPCK

      Network Sub Control Key = NSCK

      SIM Control Key = SIMCK

      Model : LG Cookie Style T310

      1 - Power ON the phone with a not accepted simcard

      2 - Type 2945#*310# to enter unlock menu

      3 - Enter unlock code

      Model: LG GT400 Viewty Smile

      1 - Switch ON the phone without SIM Card,

      2 - Press the "CellPhone" icon at the bottom of the screen to show the keypad,

      3 - Compose 2945#*400#

      4 - A new menu will appear, select "SIM Unlock"

      5 - Enter the Unlock Code and press OK

      Model: LG Optimus 2X

      1 - Insert the sim card which works out your phone

      2 - Enter 2945#*990#

      3 - window appears for the code

      4 - Enter the code nck received

      Model: LG Optimus 7 and LG-E900

      1 - Insert SIM Card from a not accepted SIM Card

      2 - Type the PIN Code of your SIM Card and submit it

      3 - The message "... Please call your network provider to get the unlock code" will appear

      But on the bottom of the screen, the keyboard is still here with "#" and "*" and invite you to "Type PIN"

      Model: LG P500 Optimus

      1 - Power ON your phone with not allowed sim card (one that didn’t come with the phone)

      2 - Type 2945#*500#

      3 - the phone will ask you to input the unlock code twice, just input the unlock code

      Model : LG GW300 Viewty & Gossip

      1 - Power on your LG Viewty GW300 with the original SIM card in.

      2 - Enter 2945#*71001#

      3 - A menu will pop up, select SIM Unlock.

      4 - Enter your unlock code and hit OK.

      5 - Your LG Viewty GW300 may automatically reboot and should now be unlocked!

      Model: LG GT350 Town

      1 - Power on your LG phone with the original SIM card in.

      2 - Enter 2945#*71001# or 2945#*350#

      3 - A menu will pop up, select SIM Unlock or network lock.

      4 - Enter your NCK unlock code and hit OK.

      5 - Your LG phone may automatically reboot.

      Model: LG GM360 Viewty Snap

      1 - Power on your LG Viewty GM360 with the original SIM card in.

      2 - Enter 2945#*360#

      3 - A menu will pop up, select SIM Unlock.

      4 - Enter your unlock code and hit OK.

      Model: LG GS290 Cookie Fresh

      1 - Power phone ON with original SIM

      2 - Type 2945#*290# to enter unlock menu

      3 - Enter the unlocking code

      Model: LG GT400

      1 - Turn phone on without simcard

      2 - Press telephone icon at bottom of screen to bring up the phone keypad

      3 - Enter 2945#*400#

      4 - A menu will pop up, select network unlock

      5 - Enter your unlock code and press OK

      6 - The phone will then reboot and the unlock is complete

      Model: LG GW620

      1 - power phone ON with original SIM

      2 - type 2945#*620# to enter unlock menu

      3 - Enter the unlocking code

      Model: LG GM205

      1 - Switch on your phone with original working simcard

      2 - Enter code 2495#71001# .. nothing will show in the screen.

      3 - Go to menu > setting > security > simlock > network lock > deactivate: enter your unlock code in it

      Model: LG GW820 eXpo

      1 - Power on your LG GW820 eXpo with the original SIM card in

      2 - Enter 2945#*700#

      3 - A menu will pop up, select SIM Unlock

      4 - Enter your unlock code and hit OK

      5 - Your LG GW820 eXpo may automatically reboot

      Model : LG GM205

      1 - Power phone ON with original SIM

      2 - Type 2945#*71001# to enter unlock menu

      3 - Enter the unlocking code

      Model: LG GB250, GB220

      1 - Power on your phone without SIM card

      2 - Enter 2945#*71001#

      3 - From the menu that pops up select "SIM unlock"

      4 - Enter unlock code you received from and press OK

      Model : LG GW520

      1 - Power phone ON with original SIM

      2 - Type 2945#*71001# to enter unlock menu

      3 - Enter the unlocking code

      Model : LG Viewty / GW300

      1 - Power on your LG Viewty GW300 with the original SIM card in

      2 - Enter 2945#*700#

      3 - A menu will pop up, select SIM Unlock.

      4 - Enter your unlock code and hit OK

      Model: LG BL20

      1 - insert original sim card and turn phone on

      2 - Enter 2945#*20#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press OK

      Model: LG BL40

      1 - Insert original sim card and turn phone on

      2 - Enter 2945#*40#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      Model : LG C1100

      1 - First you must put in an allowed simcard, then :

      2 - type 2945#*1201#.

      3 - Goto Menu/Settings/Security Settings/Sim Locks

      4 - Select 'Locktype'/Deactivate and Enter the code.

      Model : LG GT505

      1 - Power phone ON without SIM

      2 - Type 2945#*505# to enter unlock menu

      3 - Enter unlock code

      Model : LG GB250

      1 - Power phone ON without SIM

      2 - Type 2945#*71001# to enter unlock menu

      3 - Enter unlock code

      Model : LG GW520

      1 - Power phone ON without SIM

      2 - Type 2945#*71001# to enter unlock menu

      3 - Enter unlock code !

      Model : LG KB770

      1 - Power on phone with original SIM card

      2 - Type 2945*#770#

      3 - In the menu that appears select SIM unlock

      4 - Enter supplied unlock code

      Model : LG KP170

      1 - Switch ON your phone with a T Mobile SIM inserted

      2 - Press telephone icon at bottom of screen to bring up the phone keypad

      3 - Then compose : 2945#*170#

      4 - A menu will pop up, select Unlock Usim

      5 - Then Select Network Lock

      6 - Enter your unlock code and press OK

      Model: LG CU-515

      1 - Put a SP-locked sim in the phone, phone say invalid smart chip

      2 - Enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code Phone will be unlocked!

      Model : LG TE365

      1 - Power on phone with original SIM card

      2 - Type *#0001#code#

      3 - Your phone is unlocked

      Model : LG CT810 (Incite)

      1 - Power on phone with original SIM card 2 - Type 2945#*810# 3 - In the menu that appears select Sim unlock 4 - Enter supplied unlock code 5 - Your phone is unlocked

      Model : LG CB630 (Invision)

      1 - Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM

      2 - Dial this into the LG Incite's phone menu

      3 - *#865625#

      4 - Press CALL.

      5 - It should you ask you for the code

      Model : LG U830

      1 - Have your unlock code handy.

      2 - InserI a 3 SIM card in the phone and switch power on.

      3 - Enter the following key sequence 94471877#*#

      4 - Select the option ‘unlock USIM’

      5 - Select the option ‘network unlock’

      6 - Enter your unlock code

      7 - Handset should now display ‘network unlock success’.

      8 - Handset will now restart.

      Model : LG KF300

      1 - Put wrong simcard

      2 - Phone alert 'insert correct card'

      3 - Right under in screen you see deblokkeren (dutch)

      4 - Click on it en click 'Network lock off'

      5 - Insert code!

      Model : LG KP100

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*20001#

      3 - SIM unlock mode pop up

      4 - Enter your unlock code and press OK

      Model : LG KF755d

      1 - Insert original sim card and turn phone on

      2 - Press telephone icon at bottom of screen to bring up the phone keypad

      3 - Enter 2945#*755# (or 2945#*750# if 1st option doesn't work)

      4 - A menu will pop up, select sim unlock

      5 - Enter your unlock code and press OK

      Model : LG Incite CT-810

      1 - Insert a SIM from the original network

      2 - 2945#*810# will show the unlock menu

      3 - Enter unlock code

      Model : LG KP265

      1 - Use Original SIM to switch ON the Phone.

      2 - Compose 2945#*265#

      3 - Then go to MENU > SETTINGS > SECURITY

      4 - Then go to SIM LOCKS > NETWORK > DESACTIVATE

      5 - ENTER NCK (your Unlock Code)

      Model : LG ME550

      1 - Use Original SIM to switch ON the Phone.

      2 - Compose 2945#*71101#.

      3 - Menu will appear, go to settings > security > SIM lock

      4 - Enter NCK ( Unlock Code ) and press OK.

      Model : LG TU915

      1 - Switch ON your phone with an allowed SIM Card

      2 - Then compose: 2945#*9701#

      3 - It should you ask you for the code.

      OR

      Enter *#865625# then enter your 16 digits code.

      Model : LG KF390, KF390q and CF360

      1 - Insert a SIM Card from the network the mobile is locked to and turn it on

      2 - Insert the following sequence *#865625#;

      3 - Select 'Unlock USIM'

      4 - Select 'Network Lock'

      5 - Insert the unlock code

      6 - Select ok. Done!

      Model : LG G910 :

      1 - Insert an invalid simcard and turn phone on.

      2 - Insert PIN

      3 - Phone says \"Invalid sim card\"

      4 - Select \"Emergency calls\"

      5 - Enter 2945#*71001#

      6 - SIM unlock mode pop up

      7 - Select netlock

      8 - Enter your 16-digit unlock code and press OK

      Model : LG Prada, KE850 :

      1 - Switch the telephone on with Original SIM card inside.

      2 - Enter SIM pin if required.

      3 - Enter 2945#*8501# and press the call button (middle button bottom of the screen).

      4 - SIM unlock mode will appear on screen.

      5 - Enter unlock code

      6 - Select Reboot.

      7 - Switch phone off, and then turn back on again. Phone is now unlocked

      Model : LG CT81

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*810#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      Model : LG VU CU915 & CU920 (Vu)

      1 - Put a AT&T or Cingular SIM in the phone; it does not have to be an active SIM

      2 - Enter *#865625# then the 16 digit unlock code

      3 - Device should say: Network Lock Deactivated

      4 - Phone may automatically reboot and is now unlocked !

      Model : LG U310

      1 - Turn ON the phone without SIM Card :

      2 - Enter 815118#*#

      3 - Sim unlock mode pop up .

      4 - Enter your unlock code and press ok

      Model : LG iQ

      1 - Switch ON mobile with a not Allowed SIM Card,

      2 - If phone ask, enter the PIN code of your SIM Card

      3 - Now phone will ask you to enter the unlocking code

      Model : LG KC550, KS360, KP230, KP500, KP501, KP270, KM900, KM500, GT810, GC900, GT360

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*71001#

      3 - Sim unlock mode pop up .

      4 - Enter your unlock code and press ok

      Model : LG KF700 (aka LG Virgo)

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*700#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      Model : LG KC910, KF910 (aka LG Prada)

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*910#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      Model : LG KF750

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*750#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      Model : LG KF600

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*71001#

      3 - Sim unlock mode pop up .

      4 - Enter your unlock code and press ok

      Model : LG U970

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*970#

      3 - A menu will pop up, select Unlock Usim.

      4 - Select Network Lock.

      5 - Enter the unlock code and ok.

      Model : LG U300

      1 - Switch ON the phone with Accepted SIM Card (from Original Network Provider)

      2 - Enter Code : 815118#*#

      3 - Phone will ask to enter NCK

      Model : LG C2000:

      1 - Insert non-Cingular SIM card

      2 - Power on the handset - phone will display "phone restricted"

      3 - Select "Cancel" - phone will display "phone restriction code"

      4 - Enter the SIM Unlock code

      5 - Select "OK" - the handset is now successfully unlocked

      Model : LG KU990 Viewty & KE990

      1 - Insert original sim card and turn phone on.

      2 - Press telephone icon at bottom of screen to bring up the phone keypad

      3 - Enter 2945#*990#

      4 - A menu will pop up, select sim unlock

      5 - Enter your unlock code and press ok

      or

      1 - Without sim phone power "ON"

      2 - Hold "camera" + "lock" button

      3 - You will get key pad write 2945#*990#.

      4 - Press active code.

      5 - Your cellphone will be restart

      6 - Turn off cellphone and insert your sim (internation sim)

      Model : LG TU720 - LG CU720 (Shine)

      1 - Power ON your phone with not allowed sim card (one that didn't come with the phone)

      2 - Type *#865625#

      3 - the phone will ask you to input the unlock code twice, just input the unlock code

      Model : LG CE110

      1 - Put a non AT&T or Cingular SIM in the phone;

      2 - The phone display: Invalid Smart Chip

      3 - Power on handset

      4 - Select "Cancel" - phone displays "phone restriction code"

      5 - Enter the unlock code (8 digit code*)

      6) Select "OK’" - the handset is successfully unlocked

      Model : LG GR500 (Xenon)

      1 - Insert not-allowed SIM card

      2 - Power on the handset- phone will display "phone restricted"

      3 - Select "Cancel" - phone will display "phone restriction code"

      4 - Enter the SIM unlock code

      5 - Select "OK" - the handset is now successfully unlocked

      or

      1 - Insert original sim card and turn phone on.

      2 - Enter 2945#*9701#

      3 - A menu will pop up, select sim unlock

      4 - Enter your unlock code and press ok

      or

      After turning on your mobile phone, press: *#865625#

      Press Yes to continue.

      Enter the 16 digit Subsidy Unlock Code

      Enter the 16 digit Subsidy Unlock Code, again.

      Device should say: “Network Lock Deactivated”

      Phone may automatically reboot

      Model : LG CU320

      1 - Power on the handset

      2 - In Idle screen, input the special code "277634#*#".

      3 - Enter the SIM Unlock code

      4 - Access the submenu "SIM Test" in Phone Test Mode.

      5 - Input the special code "2945#*#".

      6) Access the submenu "SIM Unlock" which is just activated after the special code.

      7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.

      8) It will be unlocked.

      Model : LG CU400 & CU405

      1 - Insert non-Cingular SIM card"

      2 - Power on the handset - Phone will display "Invalid SmartChip".

      3 - Enter 159753#*#

      4 - Enter the 8 digit SIM Unlock code

      5 - Select "OK".

      Model : LG CU500

      1 - Insert non-Cingular SIM card.

      2 - Power on the handset. Phone will display "Invalid SmartChip"

      3 - (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)

      4 - In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5

      5 - Enter the 8 digit SIM unlock code

      6 - Select "OK"

      7 - The handset is now successfully unlocked.

      Model : LG CU515, CU575 (Trax)

      1 - Put a non-Cingular sim in the phone

      2 - Phone says invalid smart chip

      3 - Now enter *#865625# then select option 1 and then again select 1

      4 - Enter your 16 digits code

      5 - Device should say: Network Lock Deactivated

      Model : LG U8150

      1 - Switch ON your phone with a NOT Allowed SIM Card,

      2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,

      3 - Go to menu "SIM Lock",

      4 - Enter the Unlock Code we send to you.

      Model : LG U400

      1 - Insert the network SIM in the handset which has given u the LG U400.

      2 - Enter 2945#*88110#.

      3 - The phone will then prompt 'Unlock sim'. Press OK.

      4 - The phone will then prompt 'Network Unlock'. Press OK.

      5 - The phone will then prompt- 'Input Network Control Key'.

      Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.

      6 - It should give you the message Success.

      7 - Come back to the main screen and Enter 2945#*88110#.

      8. The phone will then prompt unlock sim. Press OK.

      9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.

      10. Then press OK

      Model : All other model

      1 - Switch ON your phone with an Allowed SIM Card,

      2 - Then compose :

      2945#*5101# - (if you have a LG 510w)

      1945#*5101# - (if you have a LG 1200 & B1200)

      2945#*5221# - (if you have a LG 5200 & 52200)

      2945#*5301# - (if you have a LG 5300)

      2945#*5401# - (if you have a LG 5400)

      2945#*70001# - (if you have a LG 7020)

      2945#*7101# - (if you have a LG 7100)

      2945#*1201# or 2945#*70001# - (if you have a LG 1100)

      2945#*70001# - (if you have a LG7250T)

      2945#*2201# - (if you have a LG C2200)

      2945#*5301# - (if you have a LG T5100)

      2945#*3311# - (if you have a LG C3310)

      3 - Go to "Menu" and then to "Settings",

      4 - Then select "Security",

      5 - To finish select "Network Provider" and select "Desactivate"

      6 - Enter the Unlock Code we send to you.

      Model : To Classify

      For the next models u must to insert the original SIM:

      LG KF245c press 2945#*7101#

      LG C3100 press 2945#*3101#

      LG C3380 press 2945#*7101#

      LG F2300 press 2945#*7101#

      LG KE260 press 2945#*2601#

      LG KE970 press 2945#*9701#

      LG KG120 press 2945#*1201#

      LG KG220 press 2945#*1201#

      LG KG240 press 2945#*3311#

      LG KG280 press 2945#*7101#

      LG KG290 press 2945#*7101#

      LG KG800 press 2945#*7101#

      LG KU250 press 2945#*250#

      LG KU380 press 2945#*380#

      After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

      For next models insert one SIM ,not the original SIM:

      LG KU311 press 815118#*#

      LG KU800 press 82652#*#

      LG L600v press 815118#*#

      LG U8150 press 277634#*#

      LG U8210 press 277634#*#

      LG U8500 press 277634#*#

      LG U400 press 2945#*88110#

      LG KC550 press 2945#*71001#

      LG KU580 press 2945#*580#

      LG KT520 press 2945#*520#

      LG KF750 press 2945#*750#

      LG KF600 press 2945#*71001#

      LG KG275 press 2945#*20001#

      LG KU380 press 2945#*380#

      LG KU311 press 815118#*#

      LG KU800 press 82652#*#

      LG L600v press 815118#*#

      LG U8150 press 277634#*#

      LG U8210 press 277634#*#

      LG U8500 press 277634#*#

      LG C3100 press 2945#*3101#

      LG C3380 press 2945#*7101#

      LG F2300 press 2945#*7101#

      LG KE260 press 2945#*2601#

      LG KG120 press 2945#*1201#

      LG KG220 press 2945#*1201#

      LG KG240 press 2945#*3311#

      LG KG280 press 2945#*7101#

      LG KS500 press 2945#*500#

      LG KP270 press 2945#*270#

      LG KF240 press 2945#*240# or 2945#*2401#

      LG KG290 press 2945#*7101#

      LG KU250 press 2945#*250#

      Enter NCK and press OK.
  • How to enter Mitsubishi unlock code

    • Model : Trium Mars

      1 - Switch ON your phone without SIM Card

      2 - Press * and hold down, without releasing enter : 787090 or 787292

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : Mitsubishi M341i

      1 - Switch ON your phone with the SIM card you want to use

      2 - Press * and hold down, without releasing enter : 787292

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : Mitsubishi M342i

      1 - Switch ON your phone with the original SIM Card

      2 - Press * and hold down, without releasing enter : 787090

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : All Mitsubishi

      1 - Switch ON your phone without SIM Card

      2 - Press * and hold down, without releasing enter : 787292 or 78729

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.
  • How to enter Motorola unlock code

    • IMPORTANT NOTICE: If multiple unlock codes are available we provide all of them, each split by a space. Usually the first code will work first time, but occasionally you will need to enter the others to unlock all of the locks on the phone. Always enter the unlock codes in the order they are given.

      Model : All Motorola

      1 - Switch ON your phone with the SIM card you want to use

      2 - Phone will show "Enter Special Code"

      3 - You can now enter the unlock code.

      WARNING - If theses messages appear :

      - "Contact Service Provider"

      - or "Tampert Alter"

      - or "Wait before enter special Code"

      - or "Contact Service'

      It's because the handset has had too many wrong codes entered. You need to leave the phone ON for about 40 min - 2 hours and when the message "Enter Code Special" appears you can re enter the unlock codes.

      Model: Z8

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter **057*

      3 - You can now enter the unlock code
  • How to enter NEC unlock code
    • Model : Nec N342i

      1 - Switch ON your phone without SIM Card

      2 - Enter : **00012*CODE#.

      Model : All others NEC

      1 - Switch ON your phone without SIM Card

      2 - Enter : #7320*CODE#.

      Model : Old NEC

      1 - Switch ON your phone without SIM Card

      2 - Enter : #3210*CODE# and press Call Button.
  • How to enter Nokia unlock code

    • WARNING: Most Nokia phone allow ONLY three, some may allow 10 wrong attempts and phone will lock up completely. Always double check the code and how to enter it before making an attempt.

      1st METHOD:

      1 – Switch ON your phone WITHOUT a SIM Card,

      2 – Enter #pw+UNLOCKCODE+1# or #pw+UNLOCKCODE+7#

      3 – The phone will show “SIM Restriction Off” and is now unlocked.

      2nd METHOD:

      1 – Switch ON your phone with a non-accepted SIM card inserted.

      2 – Enter #pw+UNLOCKCODE+1# or #pw+UNLOCKCODE+7#

      3 – The phone will show “SIM Restriction Off” and is now unlocked.

      How to get the #pw+ up on your phone:

      To generate the P you must press the star key quickly 3 times.

      To generate the W you must press the star key quickly 4 times.

      To generate the + you must press the star key quickly 2 times.

      Unlock codes are 15 digits long.

      For example if your UNLOCK CODE is: 987654321012345 you would enter: #pw+987654321012345+1#
  • How to enter Samsung unlock code

    • (1) Make sure that the phone PROMPTS for the code with a NON accepted SIM Card.

      (2) And that your IMEI is correct by dialing *#06#

      a. Go to the Dial pad and dial *#197328640#

      b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK

      c. You will see 3 options

      d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

      e. Please hit the MENU button then when the menu pops up please carefully hit BACK (to return to the previous screen)

      f. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

      g. Restart the phone on the screen by holding the power button and click RESTART

      h. When the phone prompts for the unlock code simply enter the unlock code provided to you

      i. Your phone is now permanently unlocked! NOTE: If you have trouble to enter code and/or if code is not accepted on Samsung Android Phone like Samsung T959, then please try to make “Factory Reset” following the instructions below :

      1 – Shut your Android Galaxy S down (Power off) or remove Battery.

      2 – Now press Volume up, Home and Power together.

      3 – If the Samsung Symbol is comming up leave the Home Button.

      4 – Then there is a boot Menu

      5 – Volume Up and Down to Navigate , Home to select the choosen option.

      ————–

      Our instructions are GLOBAL instructions for all unlocking services. Instructions about unfreeze are meant for people who have purchased a FACTORY SAMSUNG GENUINE UNLOCK CODES service, which include UNFREEZE code. If you have purchased a carrier unlock code (from you network provider): this service does not include UNFREEZE code. If you have FREEZED your phone, the unlock network code won’t help to unfreeze, only unfreeze code will reset freezed phones.

      Step 1: Determine the lock level of your Samsung

      The unlock codes emailed to you will look something like this: Unfreeze: 12345678 NCK: 12345678 SCK: 12345678 SPCK: 12345678

      Most networks only lock their Samsung handsets with the NCK lock enabled. Therefore you should only need to use this code when following the input instructions (see step 2). However some networks will have dual locks in place (whereby the NCK and another lock is enabled) or they may have just an alternative lock level such as SCK or SPCK.

      It is best practice to be 100% sure which lock level is present on your handset, to do this follow these instructions. Enter the following code into your handset while it is turned on and connected to its locked network.

      By this we mean the connected to the network your handset is locked to (if you are locked to Orange, insert an Orange SIM card into your handset)

      Once connected, enter this code: *#7465625#

      A menu will be displayed that will resemble the following…

      1. [xxx] Network lock

      2. [xxx] Subset lock

      3. [xxx] SP lock

      (xxx = Value ON or OFF)

      If only the Network lock is displayed saying ON then you will only need to use the NCK code with the instructions below. If you see the Subset lock value as ON then you will need the SCK code and if you see the SP lock value as ON you will need the SPCK code.

      The unfreeze code we send you should only be needed if:

      (a) You accidentally freeze your handset by entering too many incorrect codes or not following our unlock instructions accurately.

      (b) Your handset displays the ‘phone freeze’ message whenever an alternative network SIM card is inserted into your phone prior to it being unlocked.

      (c) You see the ‘return for service’ message.

      Now you know the correct lock level of your handset and thus the correct code required for input, you may continue…

      NB: If your handset does not accept the code to locate your lock level, simply move straight on to step 2 of this guide…

      Step 2 : Input Instructions

      Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series

      1 - Switch ON your phone with a non accepted SIM Card,

      2 - Compose: #7465625*638*CODE# (or *#7465625*638*CODE#)

      Model : Samsung Z105 & Z107

      1 – Switch ON your phone with a not Accepted SIM Card,

      2 – Compose : #7465625*638*CODE#

      Model: Samsung i616 Jack or Blackjack2 from Fido Canada

      1 - Power ON your phone with a FIDO SIM Card that the phone is locked to

      2 - Type #7465625*638*

      3 - Network Lock Screen appear, enter UNLOCK CODE

      4 - Device is now unlocked

      Model: Samsung A767 (Propel), A437, T459 (Gravity):

      1 – Power on without SIM

      2 – Type in #7465625*638*Unlock code# (8 digit unlock code*)

      3 – Device should say: “Network Lock Deactivated”

      4 – Phone may automatically reboot

      Model: Samsung SGH-T459 (Gravity):

      1 - Power on without SIM

      2 - From the standby screen, use the dial pad to enter the number sequence

      3 - Type in #7465625*638*Unlock code# (8 digit unlock code*)

      4 - Device should say: “Network Lock Deactivated”

      Model: Samsung i900 / Omnia

      1 – Switch ON your phone with a NON Accepted SIM Card,

      2 – Enter the pin code of this refused Simcard

      3 – Device is now asking for another pin code

      4 – Then enter the Unlock Code !

      Model: Samsung Zxxx, Dxxx, Pxxx, T139 & F490 (ex : Z140, D520, P200, etc…)

      1 – Switch ON your phone with a not Accepted SIM Card,

      2 – Compose : #7465625*638*CODE#

      Model: Samsung Z510 et Z320i et Z650i :

      1 – Switch ON your phone with a not Accepted SIM Card,

      3 – Compose **CODE#

      Model : Samsung i450, i560 & i8910

      1 – Switch ON your phone without SIM Card,

      2 – Compose #PW+CODE+1#

      The letter P appear after press 3 times quickly the button star ( * )

      The letter W appear after press 4 times quickly the button star ( * )

      The letter + appear after press 2 times quickly the button star ( * )

      Model : Samsung i780

      1 - Insert an unaccepted SIM card

      2. Enter the pin code to SIM card

      3 - At the top of screen an “exclamation mark” icon will appear

      4 - Click on “exclamation mark” icon

      5 - There will appear link “settings” – click on it

      6 - Virtual keyboard appears on screen with Enter PIN prompt.

      7 - Enter your 8-digit unlock code.

      Model : Samsung i900

      1 - Insert an unaccepted SIM card

      2 - Enter the pin code to SIM card

      3 - At the top of screen a “lock” symbol with the letters NET will appear

      4 - You will also be presented with the options “OK”; “Dismiss”

      5 - Press the “OK” option

      6 - Virtual keyboard appears on screen (the “Enter PIN” prompt may or may not appear).

      7 - Enter your 8-digit unlock code.

      Model : Samsung SGH-P207

      1 - Reset to original factory setting by typing *2767*3855#, youre phone will reboot

      2 - Then insert a sim card that is from another network that your phone is not locked to.

      3 - An Wrong sim message will come up on the screen

      4 - When message appears type in* #9998*3323#

      5 - At this time a white screen will appear which says “exit”

      6 - Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key)

      7 - From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear.

      8 - Then type *0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen.

      9 - Turn phone off, and then turn on

      10 - Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable

      11 - Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers.

      Model : All others Samsung

      1 – Switch ON your phone with a not Accepted SIM Card,

      2 – Phone will ask for “Password”,

      3 – You can now enter the Unlock Code we send to you.

      OR (if phone show “Insert Correct SIM Card”)

      1 – Switch ON your phone with a not Accepted SIM Card,

      2 – Compose : #0111*CODE#

      OR

      1 – Switch ON your phone with an unaccepted SIM Card,

      2 – The Phone will then ask for the Code or Password

      3 – You can now enter the Unlock Code we sent to you.

      Step 3: Trouble Shooting

      If your handset freezes for whatever reason and displays the ‘Phone Freeze’ or ‘Return for Service’ message then you will need to use the unfreeze code that was issued with your unlock codes.

      Choose the handset instructions closest to your own model if it is not directly available. (i.e. if you have a Samsung i900, consider using the Samsung F480 unfreeze instructions).

      NB: Unfreeze instructions are given as an added bonus to your unlock service. This is not the service you purchased and therefore it is provided free of charge.

      Reasons for “Phone Freeze”

      1. Inputting the unfreeze code rather than the unlock code into your handset.

      2. Following the incorrect input procedure for your handset (these must be followed 100% correctly).

      3. Handset automatically displaying “Phone Freeze” when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine.

      Unlocking the phone when in “Phone Freeze”

      In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad.

      Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services.

      Option 1 (usually used with keypad Samsungs – U900 etc)

      While an unaccepted SIM card is inserted

      Enter the unfreeze code

      Hit OK (either the left soft key, or in the middle of the touch-field)

      Your handset may or may not display an unfreeze message

      Now enter your unlock code (see step 1 above to determine this)

      The phone should now unlock

      or

      Option 2 (usually used with touch screen Samsungs – F480 etc)

      With Original SIM card in handset

      Enter #7465625*638*UNFREEZE CODE

      Phone Unfrozen

      Input unaccepted SIM card into handset

      Enter #7465625*638*UNLOCK CODE#

      Your Phone should now unlock

      or

      Option 3 (possible with any Samsung handset)

      While an unaccepted SIM card is inserted

      Enter unfreeze code

      Hit OK

      Enter unlock code

      Your phone should now unlock

      Please note once again, these instructions for frozen handsets are used at the owners risk.

      Unfreeze codes are supplied as a bonus for certain Samsung services and we make no warranty or guarantee of their success.
  • How to enter Sanyo unlock code

    • Model : All Sanyo

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.
  • How to enter Sendo unlock code

    • Model : All Sendo

      1 - Switch ON your phone with the SIM card you want to use

      2 - The message "Enter NCK" will appear

      3 - You can now enter the unlock code we have sent you.
  • How to enter Sharp unlock code

    • Model : All Sharp

      1 - Insert a working SIM card (no error message)

      2 - From front screen type *01763*6371#

      3 - The handset will reset back to the main screen

      4 - Press M button

      5 - Scroll to Settings and press SELECT

      6 - Scroll to Security and press SELECT

      7 - Scroll to MEP locks and press SELECT

      8 - Enter your Handset Code (the default code is 0000) and press OK

      9 - Scroll to Network and press SELECT

      10 - Scroll to Deactivate and press SELECT

      11 - Enter unlock code we have sent you and press OK

      12 - Handset should then display DONE
  • How to enter Siemens unlock code

    • Model : All Siemens

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter : *#0000*CODE#

      or

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter : *#0001*CODE#
  • How to enter Sony unlock code

    • Model : All Sony

      1 - Switch ON your phone without SIM Card

      2 - Enter : *#7465625*12*CODE#.
  • How to enter Sony Ericsson unlock code

    • Model : All Sony Ericsson's

      1 - Switch ON your phone without SIM Card

      2 - Press once the left arrow,

      3 - Press twice the button * ,

      4 - Press once the left arrow,

      5 - The message "Personalize with MNC2" will appear

      6 - You can now enter the unlock code we have sent you.

      If your phone has a "JOGDIAL" (e.g. Sony Ericsson K700i) you must press "down arrow" instead of "left arrow" for step 2 & 3. This means "Down Arrow" to direct the Jogdial down !

      Model : Sony Ericsson Satio and Sony Ericsson Vivaz

      1 - Switch ON your phone without a SIM Card

      2 - Compose #PW+CODE+1#

      Press the star (*) button repeatedly to make the P, W or + appear

      Model : Sony Ericsson X10

      1. Put in a sim card from a non accepted network

      2. Turn on the phone

      3. It will then request for an unlock code

      4. Press the unlock code box with your finger and then the number pad will appear at the bottom of screen

      5. Input the unlock code

      6. Press "UNLOCK" button which is below the unlock code box on screen
  • How to enter Sony Xperia unlock code

    • Model : All Sony Xperia

      1 – Switch ON your phone with a Non accepted SIM Card,

      2 – Phone will ask you to enter SIM unlock pin

      3 – Enter unlock code (16 digit code)

      4 – Phone will be unlocked
  • How to enter Toshiba unlock code

    • Model : All Toshiba

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.

      Model : TS803

      1. Insert a Non Vodafone SIM into the handset and power on

      2. The display will show SIM Error. This SIM card cannot be used

      3. Press the centre menu key for 3-4 seconds. The display will show Enter Code

      4. Enter the unlock code we have sent you

      5. The handset will then reboot itself. Once completed, the handset will be unlocked.
  • How to enter Treo unlock code

    • Model : Treo 180 & 270

      1 - Switch ON your phone without SIM Card

      2 - Enter : *#*#CODE#

      Model : Treo 600 / 650

      1 - Switch ON your phone with the SIM card you want to use

      2 - Go to Menu and select "Phone Tool" or "Phone Application"

      3 - Type on Virtual Keyboard *#*#CODE#

      4 - Select with PEN "Numer" and phone will show that is now unlocked.

      or

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.

      Model: 680

      1 - Switch ON your phone with the SIM card you want to use

      2 - It will then say "Your phone cannot be used with this SIM card - Click OK

      3 - Click dialpad tab, bottom of the screen far left

      4 - Using stylus type *#*#CODE# and press the green button

      5 - It will then say SIM lock has been removed from the phone

      Model : 750

      1 - Switch ON your phone with the SIM card you want to use

      2 - Using on screen keyboard enter the unlock code
  • How to enter Trium unlock code

    • Model : Trium Mars

      1 - Switch ON your phone without SIM Card

      2 - Press * and hold down, without releasing enter : 787090 or 787292,

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : Mitsubishi M341i

      1 - Switch ON your phone with the original SIM card

      2 - Press * and hold down, without releasing enter : 787292

      3 - The menu "Unlock Network" will appear

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : Mitsubishi M342i

      1 - Switch ON your phone with the original SIM Card,

      2 - Press * and hold down, without releasing enter : 787090,

      3 - The menu "Unlock Network" will appear,

      4 - Select "YES" and enter the unlock code we have sent you.

      Model : All Mitsubishi

      1 - Switch ON your phone without SIM Card,

      2 - Press * and hold down, without releasing enter : 787292 or 78729,

      3 - The menu "Unlock Network" will appear,

      4 - Select "YES" and enter the unlock code we have sent you.
  • How to enter Vitel unlock code

    • Model : All Vitel

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.

      Model: TSM7

      1 - Switch ON your phone without SIM Card

      2 - Enter the Code ##**9987

      3 - The phone will now ask for the unlock code

      4 - Enter the unlock code we have sent you.
  • How to enter VK unlock code

    • Model: VK530

      1 – Switch the handset ON without SIM Card – screen will display Insert Card.

      2 – Compose : *#83*737# (press and hold # for 1 sec) – this will give access to the personalisation menu

      3 – Select Disable Personalisation

      4 – Type Unlock Code and press the ok button

      5 – Phone should now be unlocked
  • How to enter Wonu unlock code

    • Model : All Wonu

      1 - Switch ON your phone with the SIM card you want to use

      2 - Enter the unlock code we have sent you.
  • How to enter ZTE unlock code

    • Model : All ZTE

      1 - Switch ON your phone with an Unauthorize SIM Card

      2 - Phone will prompt for Unlock Code

      3 - Enter the Unlock Code

    0 comments: